Skip to main content

Developer Quickstart

The Quorum Developer Quickstart uses the Hyperledger Besu Docker image to run a private IBFT 2.0 network of Besu nodes managed by Docker Compose.

danger

This tutorial runs a private network suitable for education or demonstration purposes and is not intended for running production networks.

Prerequisites​

  • One of the following operating systems:
    • Linux on x86_64 architecture
    • macOS on an Intel processor (M1 processor not supported yet)
    • Windows 64-bit edition, with:
      • Windows Subsystem for Linux 2
      • Docker desktop configured to use the WSL2-based engine
  • Docker and Docker Compose
  • Node.js version 12 or higher
  • Truffle
  • cURL command line
  • MetaMask
info

Allow Docker up to 4G of memory or 6G if running the privacy examples. Refer to the Resources section in Docker for Mac and Docker Desktop for details.

Generate the tutorial blockchain configuration files​

To create the tutorial docker-compose files and artifacts, run:

npx quorum-dev-quickstart

Follow the prompts displayed to run Hyperledger Besu and logging with ELK. Enter n for Codefi Orchestrate and private transactions.

note

If you enter y for private transactions, you get three Besu nodes with corresponding Tessera nodes for privacy. You can follow the privacy walk-through, which details how to send private transactions and interact with deployed private contracts.

Start the network​

To start the network, go to the installation directory (quorum-test-network if you used the default value) and run:

./run.sh

The script builds the Docker images, and runs the Docker containers.

Four Besu IBFT 2.0 validator nodes and a non-validator node are created to simulate a base network.

When execution is successfully finished, the process lists the available services:

Services list
*************************************
Quorum Dev Quickstart
*************************************
----------------------------------
List endpoints and services
----------------------------------
JSON-RPC HTTP service endpoint      : http://localhost:8545
JSON-RPC WebSocket service endpoint : ws://localhost:8546
Web block explorer address          : http://localhost:25000/
Prometheus address                  : http://localhost:9090/graph
Grafana address                     : http://localhost:3000/d/XE4V0WGZz/besu-overview?orgId=1&refresh=10s&from=now-30m&to=now&var-system=All
Kibana logs address                 : http://localhost:5601/app/kibana#/discover
Collated logs using Grafana Loki    : http://localhost:3000/d/Ak6eXLsPxFemKYKEXfcH/quorum-logs-loki?orgId=1&var-app=besu&var-search=

For more information on the endpoints and services, refer to README.md in the installation directory.
****************************************************************

To display the list of endpoints again, run:

./list.sh

Use a block explorer​

You can use Chainlens Blockchain Explorer to analyze block information, contract metadata, transaction searches, and more. Chainlens has built-in support for privacy-enabled Besu networks.

note

You must connect to one of the privacy nodes (for example, member1besu), not the dedicated RPC, to allow access for Besu privacy API methods. In production networks, you must secure access to RPC nodes.

Clone the Chainlens GitHub repository:

git clone https://github.com/web3labs/chainlens-free

From the docker-compose directory, run the following command:

cd docker-compose
NODE_ENDPOINT=member1besu PORT=26000 docker-compose -f docker-compose.yml -f chainlens-extensions/docker-compose-quorum-dev-quickstart.yml up

Open http://localhost/ on your browser. You’ll see the new initialization page while it boots up. This may take 5–10 minutes for the all services to start and the ingestion sync to complete.

To stop all the services from running, run the following command from the docker-compose directory:

docker-compose down -v

Monitor nodes with Prometheus and Grafana​

The sample network also includes Prometheus and Grafana monitoring tools to let you visualize node health and usage. You can directly access these tools from your browser at the addresses displayed in the endpoint list.

For more details on how to configure and use these tools for your own nodes, see the performance monitoring documentation, Prometheus documentation and Grafana documentation.

Grafana dashboard screenshot

and collated logs via Grafana Loki

Grafana Loki dashboard screenshot

Run JSON-RPC requests​

You can run JSON-RPC requests on:

  • HTTP with http://localhost:8545.
  • WebSockets with ws://localhost:8546.

Run with cURL​

This tutorial uses cURL to send JSON-RPC requests over HTTP.

Run with Postman​

You can also run all the requests with the Besu Postman collection.

Besu JSON-RPC APIs documentation in Postman format

View the Besu JSON-RPC APIs documentation in the Postman format and obtain example requests in multiple coding languages.

Run in Postman​

Click the following button to fork the collection and run requests directly on your local network.

Run in Postman.

Download collection​

Alternatively you can download the JSON collection file.

Request the node version​

Run the following command from the host shell:

curl -X POST --data '{"jsonrpc":"2.0","method":"web3_clientVersion","params":[],"id":1}' http://localhost:8545

The result displays the client version of the running node:

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "besu/v21.1.2/linux-x86_64/oracle_openjdk-java-11"
}

Successfully calling this method shows that you can connect to the nodes using JSON-RPC over HTTP.

From here, you can walk through more interesting requests demonstrated in the rest of this section, or skip ahead to Create a transaction using MetaMask.

Count the peers​

Peers are the other nodes connected to the node receiving the JSON-RPC request.

Poll the peer count using net_peerCount:

curl -X POST --data '{"jsonrpc":"2.0","method":"net_peerCount","params":[],"id":1}' http://localhost:8545

The result indicates that there are four peers (the validators):

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "0x4"
}

Request the most recent block number​

Call eth_blockNumber to retrieve the number of the most recently synchronized block:

curl -X POST --data '{"jsonrpc":"2.0","method":"eth_blockNumber","params":[],"id":1}' http://localhost:8545

The result indicates the highest block number synchronized on this node.

{
  "jsonrpc": "2.0",
  "id": 1,
  "result": "0x2a"
}

Here the hexadecimal value 0x2a translates to decimal as 42, the number of blocks received by the node so far, about two minutes after the new network started.

Public transactions​

This example uses the web3.js library to make the API calls, using the rpcnode accessed on http://localhost:8545.

Navigate to the smart_contracts directory and deploy the public transaction:

cd smart_contracts
npm install
node scripts/public/public_tx.js
# or via ethers
node scripts/public/public_tx_ethers.js

This deploys the contract and sends an arbitrary value (47) from Member1 to Member3. The script then performs:

  1. A read operation on the contract using the get function and the contract's ABI, at the specified address.
  2. A write operation using the set function and the contract's ABI, at the address and sets the value to 123.
  3. A read operation on all events emitted.

The script output is as follows:

{
  address: '0x2b224e70f606267586616586850aC6f4Ae971eCb',
  privateKey: '0xb3f2ab4d7bb07a4168432fb572ceb57fd9b842ed8dc41256255db6ff95784000',
  signTransaction: [Function: signTransaction],
  sign: [Function: sign],
  encrypt: [Function: encrypt]
}
create and sign the txn
sending the txn
tx transactionHash: 0x423d56f958a316d2691e05e158c6a3f37004c27a1ec9697cf9fed2a5c2ae2c2b
tx contractAddress: 0xB9A44d3BeF64ABfA1485215736B61880eDe630D9
Contract deployed at address: 0xB9A44d3BeF64ABfA1485215736B61880eDe630D9
Use the smart contracts 'get' function to read the contract's constructor initialized value .. 
Obtained value at deployed contract is: 47
Use the smart contracts 'set' function to update that value to 123 .. 
sending the txn
tx transactionHash: 0xab460da2544687c5fae4089d01b14bbb9bea765449e1fd2c30b30e1761481344
tx contractAddress: null
Verify the updated value that was set .. 
Obtained value at deployed contract is: 123
Obtained all value events from deployed contract : [47,123]

We also have a second example that shows how to transfer ETH between accounts. Navigate to the smart_contracts directory and deploy the eth_tx transaction:

cd smart_contracts
npm install
node scripts/public/eth_tx.js

The output is as follows:

Account A has balance of: 90000
Account B has balance of: 0
create and sign the txn
sending the txn
tx transactionHash: 0x8b9d247900f2b50a8dded3c0d73ee29f04487a268714ec4ebddf268e73080f98
Account A has an updated balance of: 89999.999999999999999744
Account B has an updated balance of: 0.000000000000000256

Create a transaction using MetaMask​

You can use MetaMask to send a transaction on your private network.

  1. Open MetaMask and connect it to your private network RPC endpoint by selecting Localhost 8545 in the network list.
  2. Choose one of the following test accounts and import it into MetaMask by copying the corresponding private key.
Do not use the test accounts on Ethereum Mainnet or any production network.

The following accounts are test accounts and their private keys are publicly visible in this documentation and in publicly available source code.

They are not secure and everyone can use them.

Using test accounts on Ethereum Mainnet and production networks can lead to loss of funds and identity fraud.

In this documentation, we only provide test accounts for ease of testing and learning purposes; never use them for other purposes.

Always secure your Ethereum Mainnet and any production account properly.

See for instance MyCrypto "Protecting Yourself and Your Funds" guide.

"Test Account 1 (address 0xfe3b557e8fb62b89f4916b721be55ceb828dbd73)"

Private key to copy :

0x8f2a55949038a9610f50fb23b5883af3b4ecb3c3bb792cbcefbd1542c692be63

Initial balance : 200 Eth (200000000000000000000 Wei)

"Test Account 2 (address 0x627306090abaB3A6e1400e9345bC60c78a8BEf57)"

Private key to copy :

0xc87509a1c067bbde78beb793e6fa76530b6382a4c0241e5e4a9ec0a0f44dc0d3

Initial balance : 90000 Eth (90000000000000000000000 Wei)

"Test Account 3 (address 0xf17f52151EbEF6C7334FAD080c5704D77216b732)"

Private key to copy :

0xae6ae8e5ccbfb04590405997ee2d52d2b330726137b875053c36d94e974d162f

Initial balance : 90000 Eth (90000000000000000000000 Wei)

note

Besu doesn't incorporate account management. To create your own account, you have to use a third-party tool, such as MetaMask.

  1. After importing an existing test account, create another test account from scratch to use as the recipient for a test Ether transaction.

  2. In MetaMask, select the new test account and copy its address.

  3. In the Block Explorer, search for the new test account by selecting the 🔍 and pasting the test account address into the search box.

    The new test account displays with a zero balance.

  4. Send test Ether from the first test account (containing test Ether) to the new test account (which has a zero balance).

    tip

    You can use a zero gas price here as this private test network is a free gas network, but the maximum amount of gas that can be used (the gas limit) for a value transaction must be at least 21000.

  5. Refresh the Block Explorer page in your browser displaying the target test account.

    The updated balance reflects the transaction completed using MetaMask.

Smart contract and dapp usage​

You can use a demo dapp called Pet Shop, provided by Truffle.

The dapp runs a local website using Docker, and uses smart contracts deployed on the network.

The directory created by quorum-dev-quickstart includes a dapps directory with a pet-shop subdirectory, which contains the source code for the dapp, including the smart contracts, website, and configurations to run this tutorial.

With the blockchain running and MetaMask connected to Localhost 8545 via the browser, run the following command to start the Pet Shop dapp:

cd dapps/pet-shop
./run_dapp.sh

The script:

  1. Installs the dapp Node dependencies (you may see some warnings here, but it will not prevent the dapp from running).
  2. Compiles the contracts.
  3. Deploys the contracts to the blockchain.
  4. Runs tests.
  5. Builds and runs a Docker image to serve the dapp website.
Compiling your contracts...
===========================
> Compiling ./contracts/Adoption.sol
> Compiling ./contracts/Migrations.sol
> Artifacts written to /Users/demo/quorum-test-network/dapps/pet-shop/pet-shop-box/build/contracts
> Compiled successfully using:
    - solc: 0.5.16+commit.9c3226ce.Emscripten.clang

Starting migrations...
======================
> Network name:    'quickstartWallet'
> Network id:      1337
> Block gas limit: 16234336 (0xf7b760)

1_initial_migration.js
======================

    Deploying 'Migrations'
    ----------------------
    > transaction hash:    0xdd27f5bc5b0c4a42bb4f4d9ba00b4d33742de10ba8f03484cbf095ee824ba11a
    > Blocks: 0            Seconds: 0
    > contract address:    0xFB88dE099e13c3ED21F80a7a1E49f8CAEcF10df6
    > block number:        2747
    > block timestamp:     1618000437
    > account:             0x627306090abaB3A6e1400e9345bC60c78a8BEf57
    > balance:             89999.97435026
    > gas used:            221555 (0x36173)
    > gas price:           20 gwei
    > value sent:          0 ETH
    > total cost:          0.0044311 ETH


    > Saving migration to chain.
    > Saving artifacts
      -------------------------------------
    > Total cost:           0.0044311 ETH

2_deploy_contracts.js
=====================

    Deploying 'Adoption'
    --------------------
    > transaction hash:    0xd6f5b11807a0727a92b6063c95b9101769d310592b0d3cf35d6df233d05d50e6
    > Blocks: 0            Seconds: 0
    > contract address:    0xf204a4Ef082f5c04bB89F7D5E6568B796096735a
    > block number:        2749
    > block timestamp:     1618000441
    > account:             0x627306090abaB3A6e1400e9345bC60c78a8BEf57
    > balance:             89999.968712
    > gas used:            239915 (0x3a92b)
    > gas price:           20 gwei
    > value sent:          0 ETH
    > total cost:          0.0047983 ETH


    > Saving migration to chain.
    > Saving artifacts
      -------------------------------------
    > Total cost:           0.0047983 ETH

Summary
=======
> Total deployments:   2
> Final cost:          0.0092294 ETH


Using network 'quickstartWallet'.

Compiling your contracts...
===========================
> Compiling ./test/TestAdoption.sol

TestAdoption
✓ testUserCanAdoptPet (2071ms)
✓ testGetAdopterAddressByPetId (6070ms)
✓ testGetAdopterAddressByPetIdInArray (6077ms)

3 passing (37s)

After these tests are successful, the script builds a container for the Pet Shop dapp and deploys it, binding it to port 3001 on your system.

Sending build context to Docker daemon  489.4MB
Step 1/5 : FROM node:12.14.1-stretch-slim
---> 2f7e25ad14ea
Step 2/5 : EXPOSE 3001
---> Using cache
---> 2ef0665a040a
Step 3/5 : WORKDIR /app
---> Using cache
---> e8e97cedb575
Step 4/5 : COPY . /app
---> f70e4265e598
Step 5/5 : CMD npm run dev
---> Running in 3c6e8bdb3f3b
Removing intermediate container 3c6e8bdb3f3b
---> ce2588e47ab0
Successfully built ce2588e47ab0
Successfully tagged quorum-dev-quickstart_pet_shop:latest
b1615ab765656bc027f63fc60019dba1ca572305766c820f41eaf113b7e14cf8

In the browser where you have MetaMask enabled and one of the test accounts loaded, open a new tab and navigate to the Pet Shop dapp where you can adopt lovely pets (sorry, not for real, it's a demo).

When you select Adopt, a MetaMask window pops up and requests your permission to continue with the transaction.

After the transaction is complete and successful, the status of the pet you adopted shows Success.

Dapp UI

You can also search for the transaction and view its details in the Block Explorer.

Dapp UI

The MetMask UI also keeps a record of the transaction.

Dapp UI

Deploy your own dapp​

You can deploy your own dapp to the Quorum Developer Quickstart, by configuring your dapp to point to the Quickstart network.

If you're using Truffle, update the networks object in the Truffle configuration file to specify which networks to connect to for deployments and testing. The Quickstart RPC service endpoint is http://localhost:8545.

For example, the following is the Truffle configuration file for the Pet Shop dapp used in the Quickstart Besu network:

const PrivateKeyProvider = require("@truffle/hdwallet-provider");

// insert the private key of the account used in MetaMask, e.g. Account 1 (Miner Coinbase Account)
const privateKey =
  "c87509a1c067bbde78beb793e6fa76530b6382a4c0241e5e4a9ec0a0f44dc0d3";

module.exports = {
  networks: {
    development: {
      host: "127.0.0.1",
      port: 7545,
      network_id: "*", // Match any network id
    },
    develop: {
      port: 8545,
    },
    quickstartWallet: {
      provider: () =>
        new PrivateKeyProvider(privateKey, "http://localhost:8545"),
      network_id: "*",
    },
  },
};

Deploy the dapp using:

truffle migrate --network quickstartWallet

Stop and restart the private network without removing containers​

To shut down the private network without deleting the containers:

./stop.sh

This command stops the containers related to the services specified in the docker-compose.yml file.

To restart the private network:

./resume.sh

Stop the private network and remove containers​

To shut down the private network and delete all containers and images created from running the sample network and the Pet Shop dapp:

./remove.sh

Add a new node to the network​

New nodes joining an existing network require the following:

  • The same genesis file used by all other nodes on the running network.
  • A list of nodes to connect to; this is done by specifying bootnodes, or by providing a list of static nodes.
  • A node key pair and optionally an account. If the running network is using permissions, then you need to add the new node's enode details to the permissions file used by existing nodes, or update the onchain permissioning contract.

The following steps describe the process to add a new node to the Developer Quickstart.

1. Create the node key files​

Create a node key pair and account for a new node by running the following script:

cd ./extra
npm install
node generate_node_keys.js --password "Password"
note

The --password parameter is optional.

2. Create new node directory​

Navigate to the directory where the configuration files for the network were created.

note

The directory was specified in an earlier step when running npx quorum-dev-quickstart. The default location is ./quorum-test-network.

In the config/nodes directory, create a subdirectory for the new node (for example, newnode), and move the nodekey, nodekey.pub, address and accountkey files from the previous step into this directory.

3. Update docker-compose​

Add an entry for the new node into the docker-compose file:

newnode:
  <<: *besu-def
  container_name: newnode
  volumes:
    - public-keys:/opt/besu/public-keys/
    - ./config/besu/:/config
    - ./config/nodes/newnode:/opt/besu/keys
    - ./logs/besu:/tmp/besu
  depends_on:
    - validator1
  networks:
    quorum-dev-quickstart:
      ipv4_address: 172.16.239.41
important

Select an IP address and port map not being used for the other containers. Mount the newly created folder ./config/nodes/newnode to the /opt/besu/keys directory of the new node, as seen in this example.

4. Update Prometheus configuration​

Update prometheus.yml in the ./config/prometheus/ directory to configure metrics to display in Grafana.

Insert the following under scrape_configs section in the file. Change job_name and targets appropriately if you've updated them.

- job_name: newnode
  scrape_interval: 15s
  scrape_timeout: 10s
  metrics_path: /metrics
  scheme: http
  static_configs:
    - targets: [newnode:9545]

5. Update files with the enode address​

Add the new node's enode address to the static nodes file and permissions file. The enode uses the format enode://pubkey@ip_address:30303. If the nodekey.pub is 4540ea...9c1d78 and the IP address is 172.16.239.41, then the enode address is "enode://4540ea...9c1d78@172.16.239.41:30303", which must be added to both files.

Alternatively, call the perm_addNodesToAllowlist API method on existing nodes to add the new node without restarting.

note

Calling the API method by itself only persists for as long as the nodes remain online and is lost on the next restart.

On a live network, the new node must be added to the permissions file so that subsequent restarts of the nodes are aware of the change.

6. Start the network​

Once complete, start the network up with ./run.sh. When using the smart contract you can either make changes via a dapp or via RPC API calls.