Configure Kubernetes mode in NAT Manager
Use --nat-method=AUTO or --nat-method=KUBERNETES CLI options to let the Besu node automatically configure its IP address and ports.
Use mode --nat-method=NONE to be able to set your Besu ports and IP address manually.
Default mode is AUTO but Besu will fallback to NONE mode if automatic configuration fails.
NONE mode after an automatic detection failure.```
INFO | KubernetesNatManager | Starting kubernetes NAT manager.
DEBUG | KubernetesNatManager | Trying to update information using Kubernetes client SDK.
DEBUG | NatService | Nat manager failed to configure itself automatically due to the following reason Service not found. NONE mode will be used
INFO | NetworkRunner | Starting Network.
```
Automatic configuration
Follow 3 steps to configure Besu for automatic IP address and ports detection on Kubernetes:
1. Create a load balancer
Deploy a LoadBalancer service for Besu to recover IP address and ports.
Here is an example that you can customize with your own ports and routing rules.
---
apiVersion: v1
kind: Service
metadata:
labels:
app.kubernetes.io/name: besu
app.kubernetes.io/release: "1.0.0"
name: besu
spec:
ports:
- name: "json-rpc"
port: 8545
targetPort: 8545
- name: "rlpx"
port: 30303
targetPort: 30303
selector:
app.kubernetes.io/name: besu
app.kubernetes.io/release: "1.0.0"
type: LoadBalancer
This service example lists the rules for the different ports used by Besu (json-rpc and rlpx). The default value is used for discovery.
2. Check if the load balancer is properly deployed
Verify the load balancer readiness before launching Besu.
Run kubectl describe services besu to check the service status.
The command should display the following information:
Name: besu
Namespace: default
Labels: app.kubernetes.io/name=besu
app.kubernetes.io/release=1.0.0
Annotations: kubectl.kubernetes.io/last-applied-configuration:
{"apiVersion":"v1","kind":"Service","metadata":{"annotations":{},"labels":{"app.kubernetes.io/name":"besu","app.kubernetes.io/release":"1....
Selector: app.kubernetes.io/name=besu,app.kubernetes.io/release=1.0.0
Type: LoadBalancer
IP: --------
LoadBalancer Ingress: ***<IP>***
The load balancer must have an IP address displayed in place of ***<IP>*** on the LoadBalancer Ingress line to be ready.
Run the kubectl describe services besu command again until the load balancer IP address appears in the output.
3. Deploy Besu
When steps 1 and 2 are completed, deploy Besu using the following YAML example:
---
apiVersion: v1
kind: ConfigMap
metadata:
name: besu-config
labels:
app.kubernetes.io/name: besu
app.kubernetes.io/release: 1.0.0
data:
BESU_LOGGING: "INFO"
BESU_NETWORK: "dev"
BESU_P2P_ENABLED: "true"
BESU_RPC_HTTP_ENABLED: "true"
BESU_RPC_HTTP_APIS: "eth,net,web3,debug,admin"
KUBE_CONFIG_PATH: "/opt/besu/shared/kube-config"
---
apiVersion: extensions/v1beta1
kind: Deployment
metadata:
name: besu
labels:
app.kubernetes.io/name: besu
app.kubernetes.io/release: "1.0.0"
spec:
replicas: 1
strategy: {}
template:
metadata:
creationTimestamp: null
labels:
app.kubernetes.io/name: besu
app.kubernetes.io/release: "1.0.0"
spec:
containers:
- name: besu
image: "hyperledger/besu:latest"
imagePullPolicy: Always
ports:
- containerPort: 8545
- containerPort: 30303
envFrom:
- configMapRef:
name: besu-config
restartPolicy: Always
status: {}
Automatic detection errors
Automatic detection error messages do not prevent you to use Besu.
Try the fix indicated for each error or use --nat-method=KUBERNETES CLI option and set IP address and port manually.
Possible errors messages for Kubernetes automatic detection failure:
Service not found error message
- Error message:
Nat manager failed to configure itself automatically due to the following reason Service not found. NONE mode will be used - Cause: load balancer did start correctly or has the incorrect name.
- Fix: check and modify load balancer YAML configuration and restart service.
```
INFO | KubernetesNatManager | Starting kubernetes NAT manager.
DEBUG | KubernetesNatManager | Trying to update information using Kubernetes client SDK.
DEBUG | NatService | Nat manager failed to configure itself automatically due to the following reason Service not found. NONE mode will be used
INFO | NetworkRunner | Starting Network.
```
Forbidden error message
Error message:
Nat manager failed to configure itself automatically due to the following reason Forbidden. NONE mode will be usedCause: Besu don't have permission to list the services via the Kubernetes API to retrieve IP address and ports from the load balancer.
Fix: Give it the required permissions using Role-based access control.
If you can't manage permissions, define the IP address and ports manually with
NONEmode
```
INFO | KubernetesNatManager | Starting kubernetes NAT manager.
DEBUG | KubernetesNatManager | Trying to update information using Kubernetes client SDK.
DEBUG | NatService | Nat manager failed to configure itself automatically due to the following reason Forbidden. NONE mode will be used
INFO | NetworkRunner | Starting Network.
```
For development environment, the permission issue can be fixed by running kubectl create clusterrolebinding myapp-view-binding --clusterrole=admin --serviceaccount=default:default
This command should only be used on development environment and not in production environment.
In production environment, require a finer management of permissions using Kubernetes Role-based access control.
Ingress not found error message
- Error message:
Nat manager failed to configure itself automatically due to the following reason Ingress not found. NONE mode will be used - Cause: Load balancer did not finish to recover an IP address.
- Fix: Check that the load balancer is properly deployed before launching Besu.
```
INFO | KubernetesNatManager | Starting kubernetes NAT manager.
DEBUG | KubernetesNatManager | Trying to update information using Kubernetes client SDK.
DEBUG | NatService | Nat manager failed to configure itself automatically due to the following reason Ingress not found. NONE mode will be used
INFO | NetworkRunner | Starting Network.
```